Re-Bedding Acid Neutralizer: Expert Guide [2023]

One of the most frequently asked questions I received from users is about re-bedding acid neutralizer. As we all know, clean and safe water is essential for every household. However, some water sources may contain high levels of acidity due to dissolved minerals.

To address this issue, many homes utilize acid-neutralizer systems. But over time, the media inside these systems can become depleted, necessitating re-bedding.

In this article, we will guide you through the process of re-bedding your acid neutralizer, explaining its importance and providing clear instructions for a successful re-bedding experience.

Understanding Acid Neutralizers:

Acid neutralizers are devices designed to elevate the pH level of acidic water. They are used to mitigate the potential health risks and prevent damage to plumbing fixtures, as you can recall from our previous article on Brita filters pH as well.

These systems typically employ media such as calcite or a blend of calcite and magnesium oxide to neutralize the acidity by increasing the water’s alkalinity.

Re-Bedding Acid Neutralizer
Re-Bedding Acid Neutralizer

Also read: Why Does My Well Water Pressure Fluctuate? Expert Guide

Why Re-Bedding is Necessary:

Now moving to the next part, why re-bedding acid neutralizer is so important?

Well, as per my knowledge, over a period of usage, the media within an acid neutralizer can become exhausted, diminishing its ability to effectively neutralize acidity.

As a result, re-bedding is required to replenish the media and restore the system’s optimal performance. By re-bedding, you ensure that your acid neutralizer continues to deliver high-quality water and protects your plumbing system from corrosive effects.

Steps to Re-Bed an Acid Neutralizer

Re-bedding your acid neutralizer involves the following straightforward steps:

  • Turn off the water supply: The first step is to locate the valve supplying water to the system and shut it off to prevent any water flow during the re-bedding process.
  • Drain the water: Empty the acid neutralizer tank by draining all the water from it. This can usually be accomplished by opening a drain valve or using a pump.
  • Access the media: Remove the tank head or control valve to gain access to the media inside. Refer to the manufacturer’s instructions for specific guidance on disassembling your system.
  • Remove the old media: Scoop out or vacuum the exhausted media from the tank, ensuring it is completely emptied. Take care not to damage any internal components of the system.
  • Clean and inspect: Thoroughly clean the tank and inspect it for any signs of damage or wear. This step helps maintain the longevity and efficiency of the acid neutralizer.
  • Add new media: Introduce the fresh media, whether it’s calcite, magnesium oxide, or a blend, into the tank. Follow the manufacturer’s recommendations for the correct amount and distribution of media.
  • Reassemble the system: Carefully reattach the tank head or control valve, ensuring a secure fit. Double-check that all connections are properly tightened to avoid leaks.
  • Restore water supply: Turn on the water supply and verify that there are no leaks. Allow water to flow through the system to ensure proper distribution of the new media.
  • Test water pH: Perform a pH test on the treated water to confirm that the acid neutralizer is functioning effectively. You can use pH test strips or a pH meter for accurate measurements.


Regular maintenance of your acid neutralizer system, including re-bedding when necessary, is crucial for maintaining the quality of your water supply. By following the straightforward steps outlined in this article, you can successfully re-bed your acid neutralizer and ensure its optimal performance. Remember to consult the manufacturer’s instructions and seek professional assistance if needed. With a well-maintained acid neutralizer, you can enjoy clean, safe, and pH-balanced water for your household’s needs


How often should I re-bed my acid neutralizer?

The frequency of re-bedding depends on factors such as water quality, media type, and usage. Generally, re-bedding is recommended every 5-10 years or as per the manufacturer’s guidelines.

Can I use different media for re-bedding?

It’s crucial to use the recommended media specified by the manufacturer to ensure proper pH correction. Using different media may affect the system’s performance and water quality.

Do I need to clean the tank before re-bedding?

Yes, cleaning the tank is an important step before adding new media. It helps remove sediment, debris, and any residues that may interfere with the effectiveness of the acid neutralizer.

Can I re-bed the acid neutralizer myself?

Re-bedding an acid neutralizer can be a DIY task if you are familiar with the process and have the necessary tools. However, if you are unsure or have a complex system, it’s recommended to hire a professional for assistance.

Can I use the acid neutralizer during the re-bedding process?

It is advisable to turn off the acid neutralizer and avoid using water during the re-bedding process to prevent any potential issues or contamination.

1 thought on “Re-Bedding Acid Neutralizer: Expert Guide [2023]”

Leave a Comment